Types

SUCTION FEEDING variant

In suction feeding systems, the central section between the two slopes consists of a flat base piece (W: 300 mm).

WORM SCREW FEEDING variant

In worm screw feeding systems, our pellets storage comes with a trough (B/H: 350 x 205 mm) as a central part between the slopes. The feeder worm screw is inserted and fixed in it.

POT model with SUCTION PROBES and AGITATOR

Our pe-la-modul-system is also available in a POT model with a conical base. This model is designed for the use of suction probes with an automatic agitator and is also available in different sizes.

This model will be delivered with the pre-mounted suction probe, with an automatic agitator and engine and with cover panels. The feeder system itself belongs to the delivery content of the boiler. The POT model caters to basement and floor heating with a power range of up to about 12 KW.

The pellets storage is supplied as standard with filling and suction nozzles and an entrance door with 2 Z-profiles inside to hang the door protection plates to relieve the door.

You can choose from two widths and lengths (1.5 m and 2.0 m respectively) and four different heights (1.8 m, 1.9 m, 2.0 m and 2.2 m). The intelligent design allows the modules to be easily linked with each other and build this pellet storage in a maximum length of 4.5 m (with a width of 1.5 m) or 6 m (with a width of 2.0 m).

Installation example of POT variant in a small space. With a conical base, with a suction probe and automatic agitator and engine, the entrance doors with door protection plates and with the filling and suction nozzles.

MINI model with 2 OUTLET SLIDE GATES

Our pe-la-modul-system MINI variant was developed for floors and residential pellet heating, which do not have an option to install an automatic pellet feeder due to structural conditions.

MINI can be filled quickly and cost-effectively using a tank and saves the homeowner the hassle of hauling bags. The pellets are taken via 2 outlet slide gates by means of a portable bulk container whenever there is a demand.

Variant MINI B/L/H: 1/1,5/1,9m	Outlet slide gates for a manual removal with a bucket.

MINI is equipped as standard with filling and suction nozzles and an entrance door with 2 Z-profiles inside to hang the door protection plates to relieve the door. MINI is 1.0 m wide, 1.5 m long and available in the heights 1.9 m and 2.2 m.